TBC2 has been released!

[creatorlars]

@7pip

this configuration certainly isn’t doing tbc2 character and fidelity any justice? perhaps via visual cortex even.

Does gain look too hot or is it something else you’re seeing? The knobs on SMX3 should be about halfway up if you’re wanting unity gain passthru. Has ESG3 been calibrated using the ramp based instructions here?

ESG3 Trimmer Calibration

Here is a quick process to trim your ESG3 module if desired. If your module’s color balance looks good to you, don’t mess with it! The purpose of the trimmers is to adjust the input range so that a 0V to 1V input scale matches the scale of the black/white level clipping on ESG3’s outputs. Patch a Ramp source into the Red input jack. Leave it there – the Red input is normalized to the Green and Blue jacks too, if they are left unpatched. Set all six control knobs to 50% Center positions. Mon…

If not gain related, let me know what you’re seeing!