I received a Diver in the latest (December 2019) batch which works well, but all ramp patterns show a “seam” running vertically at a constant position, about 3/4 of the way across the screen. It appears with any bank selected and its position is unchanged by any panel controls. It is most obvious fo…

Mine has same issue with the seam/step. Pretty sure all units do. If you look close in the LZX Diver tutorial video on Youtube the seam is present as well. Hopefully its firmware patchable. One of those I cant un-see even though it doesnt REALLY affect me much in practice

My Diver has the same seam issue. When I use X and Y mirroring to get a circle, I get an imperfect circule. It looks like a pair of circles cut in half, not quite down the middle, then stuck together to make a new circle. There may be other issues, too. While I’m still finding it useful, I’d very m…

I’m excited to see these diver issues fixed as I initially held off and then started seeing them pop up and haven’t really wanted to “dive” in because of it…

Yeah, I’m usually a late-adopter. I waited for a second batch to hopefully avoid these issues. I only discovered too late that this batch wouldn’t included the new firmware. I prefer it when bugfixes ship before new features.

The pixel offset Is fixable per Lars… we probably should ask @creatorlars what’s the preferred venue for issue reporting so that these can all be tracked…

This is the best venue for cataloging LZX issues! It would be ideal if all LZX discussion occurred here. So much better than Facebook for archiving discussions.

Just picked up my Diver and I confirmed that has the same issue.

Hi @Z0NK0UT , I sent Lars my list of diver issues Via email a while back, let me know if you want me to repost them here as well.

Her’s my original list of issues/examples as well as some feature requests - Some of these may have been do to my lack of familiarity with the module… When using bank 8 with PR bars as input to WAV, there are always ‘bars’ about 1/3rd of the way across the screen. If you scroll along ‘x’ these mov…

Diver discontinuity/seam

Helpdesk

Z0NK0UT January 19, 2020, 4:59pm 12

Sure! It would be helpful to have everything in one place.

Diver Firmware

Topic		Replies	Views
Diver ramps not aligned properly Helpdesk	5	658	July 17, 2020
Diver outputting glitched line plus uncertain whether vertical ramp is OK Helpdesk diver	17	1180	February 16, 2021
Diver Firmware Forum diver , eurorack	151	8401	December 21, 2023
Diver flickering Helpdesk	49	3532	February 2, 2023
All About Diver Legacy Docs diver , orion , eurorack	22	5961	August 5, 2022

Diver discontinuity/seam

Related topics